Changing blade on old craftsman table saw

#CHANGING BLADE ON OLD CRAFTSMAN TABLE SAW HOW TO#

Take your new blade and slide it onto the shaft, just the opposite of how you removed the previous blade.Д¬hange the old circular saw blade for the new one and place it correctly: Once you take out your old blade you must place the new blade on the saw shaft, however before you must be careful to know in which position to place it, since the position involves the sense turningВ .ДЄll blades have an arrow which indicates in which direction the blade will rotate when placing it in the tool, this is the indication that you must follow when placing your circular saw blade. Important note: Make sure to use the blade size for which the circular saw is designed! Step 2: Remove the arbor nut from the circular saw bladeД«efore installing your new blade, take the opportunity to clean the lower and upper guards of the blade and remove all the accumulated sawdust. Have all the elements at handВ : When you give maintenance to a tool make sure you have all the elements that you will use at hand, in the case of changing the blade for the saw you must have theВ newВ blade(previously unpacked) andВ the wrench which includes the sawВ to change the blade. Recommended is not the right word, rather it is mandatory to disconnect the saw from the outlet, this will prevent injuries from accidental activation of the machine or an electric shock. This step is critical to avoid serious injury.В When changing a circular saw blade, even an experienced craftsman can accidentally press the start button, and the health consequences will be dire.В Therefore, when working with cutting electrical units, it is necessary to strictly observe all the rules of safe work. Obviously, this is a very important step because you do not want to accidentally pull the circular saw blade while you are handling it during the change! Here are the steps to change a circular saw blade: Step 1: Unplug the circular sawВ or remove the batteryДisconnect the power supply if using a standard circular saw or remove the battery if using a cordless.

#CHANGING BLADE ON OLD CRAFTSMAN TABLE SAW HOW TO#

Remove the outer washer and set it with the bolt.In this article we will teach you how to change the blade of a circular saw and the safety measures that you must follow to do so, then we leave you the steps to follow, remember that this article is not intended to replace the information in the instructions for the sawВ , it is recommended first read the instructions and then visually support yourself with what we present to you today. If you find that the bolt is not loosening, but rather turning the motor while the blade remains secure, give the wrench a tap or a quick snap to break the bolt free.

The second way is to clamp the blade in place with some Vice-grips or other lockable pliers while loosening the bolt. The first is to raise the base plate so that some of the teeth of the blade can be pressed into a piece of wood or work table.В While pressing down on the saw and holding it in place, follow the steps above to loosen the bolt. Some older circular saws do not have a blade lock or shaft lock.В There are two ways to hold the blade in place while loosening the bolt. Loosen the bolt in the same direction as the arrow. Usually, on a corded right-hand circular saw, the bolt will loosen counterclockwise.В A left-hand saw will loosen clockwise.В You can also look for the arrow on the upper or lower blade guard for the blade rotation. The bolt will loosen in the same direction the blade rotates when in use. This is the biggest question most people have because on circular saws the old lefty-loosey, righty-tighty rule doesnвЂ™t always apply.

Changing blade on old craftsman table saw